Netgear JGS524E-100NAS 사용자 설명서

Switch Information

The Switch Information feature displays additional information about the selected switch. This 
information varies depending on the switch model. If the selected switch supports the Switch 
Information feature, you can view or set the IP address, subnet mask, and gateway address. 

DHCP Mode Selection

The Switch Information screen contains a field for DHCP (Dynamic Host Configuration 
Protocol) Mode selection. When you enable this setting, the switch obtains a network IP 
address from a DHCP server in the network. Each time the switch is powered on or reset, it 
requests an IP address from a DHCP Server in the network. This is called a Dynamic IP 
address. If there is no DHCP server in the network, a time-out message is displayed. If the 
switch fails to retrieve an IP address from a DHCP server, a default IP address of 
192.168.0.239 is entered.



Select System > Switch Information. The Switch Information screen displays.

In the DHCP Mode field, select Enable.

Click Apply. 

The IP Address, Subnet Mask, and Gateway Address fields are disabled (grayed out).

To disable DHCP address assignment, repeat the previous procedure and select 
Disable. When you click Apply, the IP Address, Subnet Mask, and Gateway Address 
information fields become active again.