Netgear JGS524E-100NAS 사용자 설명서
System Configuration
17
ProSafe Plus Switch Utility
Port Mirroring
Port mirroring allows a port to see the data on another port.
To have a switch port see the data on another port:
1.
Select System > Status, and select the switch.
2.
Select Monitoring > Mirroring to display the Mirroring screen.
3.
Enable Mirroring.
4.
Select the source port or ports.
5.
In the Destination Port drop-down list, select the port.
6.
Click Apply. Data on the source port will be routed to the destination port.
Cable Test
Some switch models have a cable testing feature that allows you to check for cable faults. If
a cable fault is found on a port, the cable test gives an estimate of the distance of the fault
from the switch.
a cable fault is found on a port, the cable test gives an estimate of the distance of the fault
from the switch.
To perform a cable test:
1.
Click System > Monitoring > Cable Tester. The Cable Tester screen displays.
2.
Select the ports to be tested and click TEST SELECTED PORT. The approximate distance
to the cable fault is displayed.
Note:
The distance to the cable fault can be up to +/- 5 meters from the
actual fault.
actual fault.