Netgear JGS524E-100NAS 사용자 설명서

VLAN Membership



Select VLAN Membership from the menu on the left. The VLAN Membership screen 

displays. 

In the VLAN Identifier drop-down list, select the VLAN group you want to configure.

Select the check boxes for the ports you want to add to the VLAN group. You can use the 

Group Operation commands to add all ports or clear the current selections.

Some switches allow Port Tagging on the VLAN Membership 
screen. See 

Click Apply. 

Return to the VLAN Configuration screen to verify your selections.

Port PVID

A Port Default VLAN ID (PVID) is a VLAN ID tag that the switch assigns to data packets it 
receives that are not already addressed (tagged) for a particular VLAN group. If you have a 
computer on port 6 and you want it to be a part of VLAN group 2, configure port 6 to 
automatically add a PVID of 2 to all data received from the computer. This ensures that the 
data from the computer on port 6 can only be seen by other members of VLAN group 2.

You can only assign one PVID to a port.



Select a switch.

Select VLAN > 802.1Q > Advanced > Port PVID. The Port PVID screen displays.

Select the port you want to configure. 

Enter the PVID you want to assign to the ports and click Apply.

Port Tagging

Port tagging allows a port to add VLAN ID tags to data packets sent through the port. The tag 
identifies the VLAN to receive the data.

Some switches allow Port Tagging to be done on the VLAN Membership screen. If so the port 
check boxes allow you to select U (un tagged) or T (tagged) in addition to adding the port to 
the VLAN group. This causes the data for an individual port to be tagged (associated) with a 
VLAN group.