Netgear JGS524E-100NAS 사용자 설명서
Supplemental Information
34
ProSafe Plus Switch Utility
Default Settings
All ProSafe Plus switch features have default settings You do not need to configure any
settings to use the ProSafe Plus switches The following table lists the default values for
switch settings Shaded features are not configurable on all switches
settings to use the ProSafe Plus switches The following table lists the default values for
switch settings Shaded features are not configurable on all switches
Table 3. Default Switch Settings
Tab
Menu
Feature
Default Value
System
Status
Switch Selection
No switch selected
Names
All names blank
Passwords
“password” for all switches
Switch Information
DHCP Mode
Enabled
IP Address
192.168.0.239
Subnet Mask
255.255.255.0
Gateway Address
192.168.0.254
Maintenance
Change Password
All fields blank
Device Reboot
Unchecked
Factory Default
Unchecked
Firmware Upgrade
Filename blank
Monitoring
Port Statistics
0
Mirroring
Disabled
Cable Tester
OK or No Cable for each port
MultiCast
IGMP Snooping Status
Enabled
VLAN ID Enabled for IGMP
Snooping
Snooping
1 (not configurable until VLAN is enabled)
Validate IGMPv3 IP header
Disabled
Block Unknown Multicast
Address
Address
Enabled
IGMP Snooping Static Router
Port (GS105E only)
Port (GS105E only)
N/A (blank)