Netgear DS116 사용자 설명서
Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
Set Normal/Uplink Push Button
The Normal/Uplink push button on the front panel of the hub allows you to
select the Uplink (MDI) or Normal (MDI-X) position for port 4 on the Model
DS104 hub, port 6 on the Model DS106 hub, port 8 on the Model DS108 hub,
and port 16 on the Model DS116 hub. All other ports are wired Normal for
direct connection to PCs.
select the Uplink (MDI) or Normal (MDI-X) position for port 4 on the Model
DS104 hub, port 6 on the Model DS106 hub, port 8 on the Model DS108 hub,
and port 16 on the Model DS116 hub. All other ports are wired Normal for
direct connection to PCs.
Select Normal if connecting a PC, server, or router to the port. Select Uplink if
connecting a hub or switch. The Normal/Uplink push button eliminates the need
to use a crossover cable.
connecting a hub or switch. The Normal/Uplink push button eliminates the need
to use a crossover cable.
Caution:
100 Mbps operation requires the use of Category 5 UTP
wiring with 100 Mbps certified connectors. NETGEAR highly
recommends using Category 5 cable so your network can operate at
either 10 or 100 Mbps.
recommends using Category 5 cable so your network can operate at
either 10 or 100 Mbps.
Connect a PC to the Hub
Normal/U
plink
10M Link
Activity
100M Lin
k Activity
Power
Collision
9097FA