Netgear EN104TP 사용자 설명서
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide
Cascading refers to connecting hubs together to increase the number of ports or
the number of users supported on the network. The 10BASE-T ports can be used
to cascade hubs together.
the number of users supported on the network. The 10BASE-T ports can be used
to cascade hubs together.
The twisted pair cable extended from a 10BASE-T port (or UTP port) is called a
twisted pair segment and can be up to 100 meters (m) in length. The 10BASE-T
ports, with the exception of port 4 on the
twisted pair segment and can be up to 100 meters (m) in length. The 10BASE-T
ports, with the exception of port 4 on the
Model EN104
TP
hub, port 6 on the Model
EN106
TP
hub, or port 8 on the
Model EN108
TP
hub, are MDI-X (or Normal) ports.
Use the following table as a guide for selecting the appropriate network cable.
Set the Normal/Uplink Push Button
If you are connecting to port 4 on the
Model EN104
TP
hub, port 6 on the Model
EN106
TP
hub, or port 8 on the
Model EN108
TP
hub, use the following table.
Determine the type of cable to use and how to set the Normal/Uplink push
button for port 4, port 6, or port 8.
button for port 4, port 6, or port 8.
Connecting Port
on the Hub
on the Hub
Connecting Device
Cable Used
Model EN104
TP
hub:
Ports 1–3
PC, server, or router
Straight-through cable
Ports 1–3
Hub or switch
Crossover cable
Model EN106
TP
hub:
Ports 1–5
PC, server, or router
Straight-through cable
Ports 1–5
Hub or switch
Crossover cable
Model EN108
TP
hub:
Ports 1–7
PC, server, or router
Straight-through cable
Ports 1–7
Hub or switch
Crossover cable
Connecting Port
Connecting Device
Cable Used
Port 4, port 6, or port 8
set to Normal
set to Normal
PC, server, or router
Straight-through cable
Port 4, port 6, or port 8
set to Uplink
set to Uplink
Hub or switch
Straight-through cable
Connect the Hub to a Network