3com 4500 PWR 50-PORT 사용자 설명서
Routing Table Display Commands
137
Only the currently used route, that is the best route, is displayed.
Example
To view a summary of routing table information, enter the following:
<4500>display ip routing-table
The information displays in the following format:
Routing Table: public net
Destination/Mask Proto Pre Cost
Nexthop
Interface
1.1.1.0/24
DIRECT 0 0
1.1.1.1
Vlan-interface1
1.1.1.1/32
DIRECT 0 0
127.0.0.1
InLoopBack0
2.2.2.0/24
DIRECT 0 0
2.2.2.1
Vlan-interface2
2.2.2.1/32
DIRECT 0 0
127.0.0.1
InLoopBack0
3.3.3.0/24
DIRECT 0 0
3.3.3.1 Vlan-interface3
3.3.3.1/32
DIRECT 0 0
127.0.0.1
InLoopBack0
4.4.4.0/24
DIRECT 0 0
4.4.4.1
Vlan-interface4
4.4.4.1/32
DIRECT 0 0
127.0.0.1
InLoopBack0
127.0.0.0/8
DIRECT 0 0
127.0.0.1
InLoopBack0
127.0.0.1/32
DIRECT 0 0
127.0.0.1
InLoopBack0
display ip routing-table
acl
Syntax
display ip routing-table acl acl_number [ verbose ]
View
All views.
Parameters
acl_number
Enter the number of the IP ACL, in the range 2000 to 2999.
verbose
Enter to display verbose information about both the active and inactive
routes that passed filtering rules. If you do not enter this parameter, the command
only displays a summary of the active routes that passed filtering rules.
only displays a summary of the active routes that passed filtering rules.
Description
Use the
display ip routing-table acl
command to view the route filtered
through the specified ACL.
This command is used to display the routes that passed the filtering rules in the
specified ACL.
specified ACL.
The command only displays routes that passed basic ACL filtering rules.
Table 17 Output Description of the
display ip routing-table
Command
Field
Description
Destination/Mask
Destination address/Mask length
Protocol
Routing protocol
Pre
Routing preference
Cost
Cost
Interface
Output interface, through which the data packet destined for the
destination network is sent
destination network is sent