3com 4500 26-PORT 사용자 설명서
92
C
HAPTER
4: U
SING
P
OWER
OVER
E
THERNET
(P
O
E) C
OMMANDS
View
System View
Parameter
None
Description
Use the
poe legacy enable
command to enable the nonstandard-PD detect
function.
Use the
undo poe legacy enable
command to disable the nonstandard-PD
detect function.
PDs compliant with 802.3af standards are called standard PDs.
By default, the nonstandard-PD detect function is disabled.
Example
Enable the nonstandard-PD detect function.
[4500]poe legacy enable
Legacy detection is enabled
Disable the nonstandard-PD detect function.
[4500]undo poe legacy enable
Legacy detection is disabled
poe max-power
Syntax
poe max-power max-power
undo poe max-power
View
Ethernet Port View
Parameter
max-power:
Maximum power distributed to the port, ranging from 1000 to
15400 mW.
Description
Use the
poe max-power
command to configure the maximum power that can be
supplied by current port.
Use the
undo poe max-power
command to restore the maximum power supplied
by current port to the default value.
By default, the maximum power that a port can supply is 15400 mW.