3com 4500 50-PORT 사용자 설명서
Log Commands
363
Example
Rename channel 0 as execconsole.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]info-center channel 0 name execconsole
[SW4500]
info-center console
channel
Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
View
System view
Parameter
channel-number:
Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name:
: Specify the channel name. The name can be
channel6,
channel7, channel8, channel9, console, logbuffer, loghost, monitor,
snmpagent, trapbuffer.
Description
Use the
info-center console channel
command to configure the channel
through which the log information is output to the console.
By default, the Switch 4500 does not output log information to the console.
This command takes effect only after system logging is started.
For the related commands, see
info-center enable
,
display info-center
.
Example
Configure to output log information to the console through channel 0.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]info-center console channel 0
[SW4500]
info-center enable
Syntax
info-center enable
undo info-center enable
View
System view