3com 5104M-FIB 사용자 설명서
SET BPORT_LEC TIME
2-83
Example
The following command sets the flush response timeout period for the LEC in
slot 4, port 1 to 3 seconds:
slot 4, port 1 to 3 seconds:
CB5000> set bport_lec 4.1 time flush_timeout 3
Bridge Port 04.01 parameter set.
Related Command
SHOW BPORT_LEC CONFIGURATION
max_unknown_frame_
time
time
Specifies the time (in seconds) in which a LEC will send no more
than the maximum unknown frame count frames to the
Broadcast and Unknown Server (BUS) for a given unicast LAN
destination.
than the maximum unknown frame count frames to the
Broadcast and Unknown Server (BUS) for a given unicast LAN
destination.
option
Choose from a range of 1 through 10.
path_switch_delay
Time (in seconds) since sending a frame to the BUS after which
the LEC may assume the frame has been delivered or discarded.
You can use this attribute to bypass the flush protocol.
the LEC may assume the frame has been delivered or discarded.
You can use this attribute to bypass the flush protocol.
option
Choose from a range of 1 through 8.
vcc_timeout
Timeout (in seconds) after which a Data Direct VCC should be
released if it has not been used to transmit or receive data
frames.
released if it has not been used to transmit or receive data
frames.
option
Choose from a range of 0 through 2147483647.