Omnitron Systems Technology 4Tx 전단
iConverter
iConverter
®
4Tx
4-Port 10/100BASE-TX Managed Ethernet Switch
iConverter
The
iConverter
4Tx 10/100 Ethernet Switch module is a member
of the managed
iConverter
product family. The 4Tx provides a
compact 4-Port 10/100 Ethernet switch that is expandable
across the
across the
iConverter
19-Module, 5-Module and 2-Module
chassis backplanes, as well as being supported as a
standalone switch with the
standalone switch with the
iConverter
1-Module Chassis.
The
iConverter
4Tx UTP ports feature 10/100Mbps, Half or
Full-Duplex and auto-negotiation with both hardware and
software controls. Hardware control is available for two ports
while all four ports are under software control for these features.
software controls. Hardware control is available for two ports
while all four ports are under software control for these features.
RJ-45 crossover support eliminates need for a crossover cable
and facilitates connectivity to different types of network
equipment. The 4Tx crossover switch is supported on Port 1.
Ports 2, 3 and 4 support an automatic crossover detection
mode. The 4Tx also features two Ethernet backplane ports to
provide connectivity to adjacent modules for network expansion
and for in-band connectivity to an
and facilitates connectivity to different types of network
equipment. The 4Tx crossover switch is supported on Port 1.
Ports 2, 3 and 4 support an automatic crossover detection
mode. The 4Tx also features two Ethernet backplane ports to
provide connectivity to adjacent modules for network expansion
and for in-band connectivity to an
iConverter
Network
Management Module.
4Tx enhanced features include Port VLAN which allows
complete control of traffic flow between a module’s ports, and
Port Access Control which incorporates remote enabling and
disabling of each individual port. The 4Tx supports reporting of
MIB statistics that are available for 32 variables per port, reporting
a wide range of real-time packet statistics to provide
performance and operational monitoring.
complete control of traffic flow between a module’s ports, and
Port Access Control which incorporates remote enabling and
disabling of each individual port. The 4Tx supports reporting of
MIB statistics that are available for 32 variables per port, reporting
a wide range of real-time packet statistics to provide
performance and operational monitoring.
iConverter
4Tx modules are hot-swappable and can be mounted
in a 19-Module (2U high) or 5-Module (1U high) rack-mountable
chassis (19-inch or 23-inch) with any combination of redundant
AC, 24VDC or 48VDC power supplies. They can also be mounted
in a 2-Module AC or 18 to 60VDC powered chassis, or in a
1-Module AC/DC powered chassis.
chassis (19-inch or 23-inch) with any combination of redundant
AC, 24VDC or 48VDC power supplies. They can also be mounted
in a 2-Module AC or 18 to 60VDC powered chassis, or in a
1-Module AC/DC powered chassis.
The
iConverter
4Tx Managed Ethernet Switch supports
10BASE-T or 100BASE-TX on four UTP ports
Enhanced features include Port VLAN, Port Access
Control and MIB Statistics
Control and MIB Statistics
Multiple 4Tx modules can be installed to expand the
port concentration in a single chassis
port concentration in a single chassis
Supports Half or Full-Duplex and auto-negotiation
RJ-45 crossover support eliminates need for
different cables in connecting to various devices
different cables in connecting to various devices
Ethernet backplane ports for connectivity to adjacent
modules
modules
Management is available with the addition of a
management module to the chassis
management module to the chassis
SNMP management via
NetOutlook
™
provides real-time
port and module information, remote parameter
configuration and trap notification
configuration and trap notification
Conforms to IEEE 802.3, 10BASE-T and 100BASE-TX
specifications
specifications
Modules are hot-swappable in 19-Module, 5-Module,
2-Module or 1-Module chassis
2-Module or 1-Module chassis
Lifetime Warranty and free 24/7 Technical Support