Epson MLC 104 IP Plus 사용자 설명서

 

Select the Auto Configure IP Address check box. The 

 text box becomes active and the first three 

octets of the MAC address appear.

 

Locate the MAC address on the rear of the Extron IP 

product or obtain it from your network administrator.

 

Enter the remainder of the MAC address in the MAC 

text box (the first three octets should be filled in).

 

Click the Set button.  This assigns the new IP address to 

the IP device. 

 

Click the New Location button in the upper right corner of 

the Add Device dialog box.  A Location folder is created, 

in edit mode.  You can use additional folders to create up 

to eight location levels.  

  Assign a location-oriented name to the highlighted folder 

(e.g., Room 201).  

  Once finished, click the OK button.  The  

Global Configurator Front Panel window appears, as 

shown on the following page.

N

Global Configurator supports scheduling, monitoring, and  

e-mail alerts for all connected devices (e.g., a video projector).  

For example, you can create a schedule to shut down a projector 

at a predetermined time, and/or create an e-mail alert that 

warns a school administrator if the projector's lamp hours are 

nearing expiration.

Before you set up e-mail notifications, ensure that your e-mail 

, subnet mask and gateway settings are set.  If not, use the 

Change Device Setting feature to set them up.
1.

 

From the Tools menu, choose Change Device Settings....

The Device Settings page appears and displays every 

device in the current project.

 

Select the MLC 104 IP Plus from the list.

 

From the Settings menu, choose Set Mail Server....