Siemens KVM series 3-1621 사용자 설명서
Setting KVM s3-1621 and KVM s3-1641 appliance security
31
590-591-
609
B
3.9.7
Setting KVM s3-1621 and KVM s3-1641
appliance security
appliance security
You can enable a screen saver to start if the user remains unused for a specified length
of time. When the screen saver starts, the user is disconnected from any target device
to which it was connected. The screen saver stops when you press any key or move the
mouse.
of time. When the screen saver starts, the user is disconnected from any target device
to which it was connected. The screen saver stops when you press any key or move the
mouse.
Press Print Screen and press Pause to immediately start the screen saver.
If you set a password, the keyboard and mouse are locked when the screen saver
starts.
starts.
Press a key or move the mouse while the screen saver is running to open a
Password window opens.
Password window opens.
Type the password and click OK to unlock the keyboard and mouse.
3.9.7.1
Enabling the screen saver
Press Print Screen. The Main window opens.
Click Setup - Security. If a password is set, the Password window opens. Type the
password and click OK.
password and click OK.
Select the Enable Screen Saver check box.
In the Inactivity Time field, type the number of seconds (1 through 99) that must
elapse before the screen saver starts.
elapse before the screen saver starts.
If the monitor is Energy Star compliant, select Energy; otherwise, select Screen.
(Optional) To run the screen-saver test, click Test. The screen-saver test runs for
10 seconds.
10 seconds.
Click OK.
3.9.7.2
Disabling the screen saver
Press Print Screen. The Main window opens.
Click Setup - Security. If a password is set, the Password window opens. Type the
password and click OK.
password and click OK.
A password must contain both alphabetic and numeric characters and can be up to
12 characters long. Passwords are case-sensitive. Valid characters are A through
Z, a through z, 0 through 9, space, and hyphen.
12 characters long. Passwords are case-sensitive. Valid characters are A through
Z, a through z, 0 through 9, space, and hyphen.
Clear the Enable Screen Saver check box.
Click OK.
3.9.7.3
Setting or change a password
Press Print Screen. The Main window opens.
Click Setup - Security. If a password is already set, the Password window opens.
Type the password and click OK.
Type the password and click OK.
Double-click the New field.
In the New field, type the new password.
In the Repeat field, type the password again.
Click OK.
If you forget the password, you must call technical support. See section
3.9.7.4 below.
3.9.7.4 below.