Siemens SCALANCE X-200 사용자 설명서

 

Configuration / diagnostics using remote mechanisms 

 

6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI) 

SCALANCE X-200 
Operating Instructions, 12/2011, A5E00349864-19 

171

 

Restart System 

Click this button to restart the IE Switch X-200. You must confirm the restart in a dialog box. 

During a restart, the IE Switch X-200 is reinitialized, the internal firmware is reloaded. The 

learned entries in the address table are deleted. You can leave the browser window open 

while the IE Switch X-200 restarts. 
Memory Reset and Restart 

Click on this button to restore the factory configuration settings with the exception of the 

following parameters: 
●  IP address 
●  Subnet mask 
●  IP address of the default router 
●  DHCP flag 
●  System name 
●  System location 
●  System contact 
●  PNIO Device Name 
●  System Event Log Table 
●  Settings for ring redundancy and standby 
An automatic restart is triggered. In the user mode, this button is invisible. 
Restore Factory Defaults and Restart 

Click this button to restore the factory defaults for the configuration. The protected defaults 

are also reset. In the user mode, this button is invisible. 

 

 

Note 
The IE Switch X-200 must be given a new IP address before it can be accessed again. 

 

Syntax of the Command Line Interface 

Table 6- 5 

System Restart & Defaults - CLI\SYSTEM\RESTARTS> 

Command 

Description 

Comment 

memreset 

Restores the factory defaults. 

The protected settings are 

retained. 

Administrator only. 

defaults 

Restores the factory defaults. 

The protected settings are also 

reset. 

Administrator only.