Siemens X-400 사용자 설명서
System Description of SCALANCE X-400
Operating Instructions for SCALANCE X-400 Industrial Ethernet Switches
22
C79000-G8976-C186-03
● C-PLUG
When replacing a device, the C-PLUG can be removed and inserted in the new
device so that the configuration can be retained.
device so that the configuration can be retained.
● VLAN
SCALANCE X-400 has port-based support of virtual networks (VLAN). A physi-
cal network can be divided into several virtual networks. This results in less net-
work load compared with other defined VLANs.
cal network can be divided into several virtual networks. This results in less net-
work load compared with other defined VLANs.
● Spanning Tree / Rapid Spanning Tree
SCALANCE X-400 can process both the Spanning Tree Protocol (STP) and the
Rapid Spanning Tree Protocol (RSTP). This prevents circulating packets and, in
the event of a link going down, quickly provides an alternative path. With the
spanning tree protocol, the reconfiguration time is between 20 and 30 seconds,
with rapid spanning tree, it is approximately one second. Spanning tree / rapid
spanning tree is disabled as default.
Rapid Spanning Tree Protocol (RSTP). This prevents circulating packets and, in
the event of a link going down, quickly provides an alternative path. With the
spanning tree protocol, the reconfiguration time is between 20 and 30 seconds,
with rapid spanning tree, it is approximately one second. Spanning tree / rapid
spanning tree is disabled as default.