Samsung SCQ-041AP 사용자 설명서

The is a standard 19-inch electronic equipment rack. If you intend to

mount the SCQ-041P in a rack, do as following:

1. Remove the mounting screws from their holes and align each Rack

mounting adaptor vertically along the front edge of the SCQ-041P

enclosure.

2. Insert the mounting screws through each mounting adaptor and into

the corresponding screw holes on the SCQ-041P.

3. Partially tighten the screws so that they are holding the adaptor

loosely in place.

4. Adjust the mounting adaptor the front of the adaptor is flush with the

front panel of the SCQ-041P enclosure.

5. Tighten the mounting screws so that the adaptor is firmly attached to

the SCQ-041P enclosure. Be careful not to over tighten the screws.

6. Repeat the procedure described above to attach the remaining

adaptor to the other end of the SCQ-041P enclosure.

DIGITAL
COLOR QUAD SWITCHER

POWER

CHARACTER

SELEC

T

MENU

SETUP

ENTER

RESET

LIST

ON

OFF

AUTO SWITCHER

1

2

3

4

1

2

3

4

SINGLE DISPLAY

QUAD DISPLAY

FREEZE

SYSTEM SETUP

ALARM

1 2
3 4