StarTech.com SV431U3A 사용자 설명서

Instruction Manual

5

Operation 

The front-panel Smart Touch button allows you a direct control over KVM switching 

operation. Simply press the button to switch to the respective PC port. For more 

operation about Smart Touch button, please refer to “Quick Reference Sheet”.

A Hotkey command is a short keyboard sequence for selecting a computer, activating 

computer scan, etc.  A hotkey sequence starts with two left <ScrLk> keystrokes 

(successively within 2 seconds) followed by one or two more keystrokes.  A built-in 

tone generator creates a high-pitch beep for correct hotkey command; otherwise, one 

low-pitch beep is generated for errors and the bad key sequence will not be forwarded 

to the selected computer.  
Please refer to the “Quick Reference Sheet” for available commands

Select PC Port 

(Jointly select 

PC port/ hub 

port control/ 

audio&mic, 

if binding is 

enabled)

ScrLk + ScrLk +  

(1~2/1~4)

Touch the 

corresponding 

button to select 

the active PC port.

Select the PC port