StarTech.com IES61002POE 사용자 설명서

Instruction Manual

3

Terminal Block Power Connector

Power can be provided through the dual inputs from separate sources, if needed. One 

electrical relay can be wired into an alarm circuit. The relay is connected as Normally 

Closed (will open upon alarm condition).

DIP Switch Configuration

1.  Alarm Enable:  When ‘On’ this switch will disable alarm relay and fault LED if there is 

a power failure in one supply. If only connecting to a single power source, place this 

switch ‘On’ to disable alarm. 

2.  BSP: When ‘On’ this switch will disable the broadcast storm protection feature which 

is enabled by default.