Sony 9000 사용자 설명서
183
Names and Functions of Parts of the Control Panel
Ch
apt
apt
er 2
Men
u
s
an
d
d
Co
nt
nt
rol P
ane
l
Device Control Block (Trackball)
The device control block is used for three-
dimensional transform operations using a
dimensional transform operations using a
DME, for wipe pattern position setting, and
for VTR operation.
for VTR operation.
a Region selection buttons
The operation mode allocated to the device
control block depends on the selection state
of the region selection buttons.
When the [M/E 1], [M/E 2], [M/E 3], and
The operation mode allocated to the device
control block depends on the selection state
of the region selection buttons.
When the [M/E 1], [M/E 2], [M/E 3], and
[P/P] buttons are selected: This
enables the wipe pattern position
setting (positioner) operation mode in
the device control block. You can
select multiple buttons simultaneously.
enables the wipe pattern position
setting (positioner) operation mode in
the device control block. You can
select multiple buttons simultaneously.
When the [USER] button is selected: This
enables pattern position setting used
for color backgrounds.
for color backgrounds.
When the [DME 1] to [DME 4] buttons
are selected: This enables the three-
dimensional transform operation mode
dimensional transform operation mode
in the device control block.
Press a button, turning it on, to select a
DME channel. You can select multiple
buttons simultaneously.
The number of valid buttons depends
on the number of DME processor
channels installed.
Press a button, turning it on, to select a
DME channel. You can select multiple
buttons simultaneously.
The number of valid buttons depends
on the number of DME processor
channels installed.
When the [DEV] button is selected: This
enables the VTR operation mode in the
device control block. In this state, the
[M/E 1] to [M/E 3] buttons, P/P button
and DME1 to DME8 buttons function
as the device 1 to device 12 allocation
buttons as follows.
M/E1 (DEV1): device 1
M/E2 (DEV2): device 2
device control block. In this state, the
[M/E 1] to [M/E 3] buttons, P/P button
and DME1 to DME8 buttons function
as the device 1 to device 12 allocation
buttons as follows.
M/E1 (DEV1): device 1
M/E2 (DEV2): device 2
DEV
USER
M/E1
DME1
DME5
MENU
SHIFT
M/E2
DME2
DME6
ASP
PERS
SUB
LOC
SIZE
FMR1
AXIS
LOC
MAIN
LOCAL
K1
CB1
GLB
K2
CB2
CLR
WORK
BUFR
M/E3
DME3
DME7
SRC
K3
FM1
TRGT
K4
FM2
LOC
XYZ
XYZ
FMR2
X
P/P
DME4
DME8
ROT
POS
POS
Y
Z
CTR
RUN
CTRL
1
Region selection buttons
3
Trackball
4
Z-ring
2
Operating buttons
5
MENU button