Sony 9000 사용자 설명서
239
Executing a Transition
Ch
apt
apt
er 3
T
ra
n
s
iti
ons
To enter a difference from the current value
After pressing the [
+
/
−
] button, enter the difference and press the [TRIM]
button.
To change the sign (+ or
To change the sign (+ or
−
), press the [
+
/
−
] button.
Setting the transition rate by a menu operation
Use the following procedure.
1
In the M/E or PGM/PST menu, select first VF7 ‘Misc,’ then HF1
‘Transition.’
‘Transition.’
The Transition menu appears.
2
Select any transition type in the <Transition Type> group.
3
Turn the knob to set the transition rate.
Pattern Limit
There are two ways of setting a pattern limit: either by operating the fader lever
to save the fader position, or by using the Wipe menu or DME Wipe menu to
access the Edge/Direction menu for the M/E or PGM/PST bank.
to save the fader position, or by using the Wipe menu or DME Wipe menu to
access the Edge/Direction menu for the M/E or PGM/PST bank.
For an overview of the pattern limits, see page 44.
Notes
• A pattern limit only applies when a wipe or DME wipe is selected as the
transition type.
• A pattern limit cannot be applied to an independent key transition (see page
248).
Knob
Parameter
Adjustment
Setting values
1
Transition Rate
Transition Rate
0 to 999 (frame count)