StarTech.com SV231USBDDM 사용자 설명서

Instruction Manual

3

Green = PC Connected
Amber = Port selected, PC connected 
Red = Port selected, no PC connected

NOTE: The LED will flash quickly while the 

KVM is mapping a newly connected device

Blue = Currently selected hot-key
Not-lit = hot-key has been disabled

The reset button causes all USB ports to reset and settings to reload. The KVM will re-

connect all devices (including DDM port and USB hub port) and PC ports like an initial 

power on.

1.  Connect the external power adapter from a wall outlet to the power connector on 

the rear panel of the KVM switch.

2.  Connect a monitor into the Console’s video connector, then plug your USB keyboard 

and mouse into the DDM USB keyboard and mouse ports on the KVM switch. 

 

NOTE: The DDM ports on the KVM are designed to be used with USB HID (Human 

Input Device) only.

3.  Use the included KVM cables to connect both video and USB, to one of the KVM’s PC 

ports.

4.  Repeat Step 3 for each PC you wish to use on the KVM. 

 

OPTIONAL: Connect any other USB peripherals you wish to share between the 

connected computers/devices to either the USB Hub port on the Console side, and/

or the front panel USB port.