Sun Microsystems 816-0830-12 사용자 설명서
57
C H A P T E R
5
Switch Activation
This chapter contains the procedures for bringing the new Sun StorEdge FC Switch
3.0 software onto the network. For more details about the switch, refer to Switch
Management User’s Manual.
3.0 software onto the network. For more details about the switch, refer to Switch
Management User’s Manual.
Configuring the Switch Ethernet Port
The IP address of the switch is set to the default value of 10.0.0.1. You can change
this default IP address using the Reverse Address Resolution Protocol (RARP), or
the switch management GUI. This guide provides the procedures for changing the IP
address using RARP only. To set the IP address using the GUI method, see Chapter
2 in the Sun Switch Management User’s Manual.
this default IP address using the Reverse Address Resolution Protocol (RARP), or
the switch management GUI. This guide provides the procedures for changing the IP
address using RARP only. To set the IP address using the GUI method, see Chapter
2 in the Sun Switch Management User’s Manual.
Using RARP to Change the IP Address
You can use RARP to change the address when you first receive the switch or if you
forget the address.
forget the address.
The Sun StorEdge FC Switch 3.0 RARP feature automatically downloads the
assigned IP address to the switch. After you cable the switch and turn the power on,
the IP address is automatically assigned.
assigned IP address to the switch. After you cable the switch and turn the power on,
the IP address is automatically assigned.