GarrettCom 6K25e 사용자 설명서

Magnum 6K25e Gigabit Fiber Switch            Installation and User Guide (10/07) 

 

13 

.

.

(MDIX) feature to eliminate the use of cross-over cable, and the two fiber ports operate 

at 100Mbps full-duplex (default). User mode control per port through the MNS software 

is also the same. 

On Magnum “4+2” Combo modules, there are four LED’s for each RJ-45 port, 

which indicate status the same as described for the 6K8-RJ45 in Section 2.2.3 above. The 

fiber port’s LEDs indicate status the same way as described for the SFF fiber modules in 

Section 2.2.2 above.  Color-coding on the panel of the module shows which LEDs 

belong to which port. 

 

The Magnum Combo six-

port modules are also available with 

4@ MTRJ 100Mb mm SFF fiber and 

2@10Mb fiber mm ST ports, and with 

4@ RJ45 10/100 copper and 2@10Mb 

fiber mm ST ports. The    

 4@ RJ-45 + 2@ 10 Mb ST   

operation of the SFF fiber and the RJ-45 half of 

the module is as described for those port types above.  For detailed information about 

10Mb mm ST fiber half of the module, see Section 2.2.5. 

The Magnum Combo 

six-port modules are also available 

with 4@ MTRJ 100Mb mm SFF 

fiber and 2@10Mb fiber mm ST 

ports, and with 4@ RJ45 10/100 

copper and 2@10Mb fiber mm ST 

ports. The    4@ RJ-45 + 2@ 10 Mb ST 

operation of the SFF fiber 

and the RJ-45 half  of the module is as described for those port types above.  For detailed 

information about 10Mb mm ST fiber half of the module, please check  section 2.2.5. 

The 4port @10Mb ST fiber modules behave the same as the 8@100Mb ST 

TX       LK     RX

TX       LK     RX

 

 

1                                          5