Avaya 580 사용자 설명서

16-8

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Chapter 16

Select 

Select the Interface to be configured. This field id 
displayed in the IPX Interfaces Web page not in the Add 
Interfaces Web page.

Admin. State

Select the administration state of the interface.

Options include:

Interface

Enter the name of the IPX interface.Up to 31 Alpha-
numeric characters

VLAN

Select the VLAN that corresponds to the IPX interface 
you selected.

If you need to create a new VLAN, see 

“

” in 

, “

.”: 

Network Number

Enter the number of the IPX network you want to assign 
to the IPX interface. This number is a hexadecimal 32 
bit (8 characters) number.

Node Address

Displays the node address on which the IPX interface 
resides. A 48-bit (12 characters) number.

This parameter is displayed in the IPX Interface Web 
page, not in the Add IPX Interface Web page.

Encapsulation 
Frame Type

Select the format of the MAC header on the IPX packets 
sent by the router on the interface. Formats include:

Ethernet II (Maximum Transmission Unit (MTU) = 
1500)

Ethernet 802.2 (MTU = 1497)

Ethernet SNAP (MTU = 1492)

Ethernet 802.3 (MTU = 1500)

The default is Ethernet II

Ticks

Specify the amount of time (in ticks) that the packet 
takes to reach the network number you specified. A tick 
is approximately 1/18th of a second. The default value is 
1

RIP 

Select Disable to prevent IPX RIP from routing globally. 
This affects all IPX interfaces set up to use the IPX RIP 
routing protocol. The default value is Enable.