Avaya 580 사용자 설명서

다운로드
페이지 782
2-8
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 2
CAUTION:
 lists the minimum, maximum, and default values for the Telnet 
inactivity timer. 
Avaya recommends that you not disable the inactivity timer. If the 
inactivity timer is disabled and the maximum number of Telnet 
sessions is open, none of them will expire. Subsequent attempts to 
establish a Telnet session will fail. Additionally, idle Telnet sessions 
may represent security risks.
Using the Web Agent to Configure the Switch 
The switch provides an embedded HTTP server that allows you to set 
switch parameters by using the Web Agent. You can use this interface for 
quick and simple configuration changes.
As a more secure alternative to HTTP, you can use HTTPS. For information 
on using an HTTPS connection to manage the switch, see “
Although this manual provides detailed procedures for using the Web Agent 
to configure the switch, the CLI commands to perform the same task are 
listed after each procedure. See Command Reference Guide for the Avaya 
P580 and P882 Multiservice Switches, Software Version 6.1 
for details 
about these commands.
This section contains the following procedures: 
Table 2-3.  Telnet Inactivity Timer
Minimum value:
0 seconds
Disables inactivity timer
Default value:
900 seconds
Expiration time is 15 minutes.
Maximum value:
65,536 seconds
Expiration time is approx. 18 hrs.