Avaya 580 사용자 설명서
21-8
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 21
■
To forward events to syslog servers,
(configure)#
set syslog
facility {start | system | config | temp | resource | fan |
service_port | user_port | power | bridge_stat | switch_fabric |
ospf | rip | ldap | appletalk | auth_failure | redundant_cpu |
dvmrp | cli | snmp | unknown_mac | vrrp | login_status | acl_log |
ssl_ssh | all}
service_port | user_port | power | bridge_stat | switch_fabric |
ospf | rip | ldap | appletalk | auth_failure | redundant_cpu |
dvmrp | cli | snmp | unknown_mac | vrrp | login_status | acl_log |
ssl_ssh | all}
Configuring Notification of Protocol Events
Overview
*Important: If enabled, protocol event logging displays system
messages that help Avaya Technical Support
troubleshoot network problems. Avaya recommends
that logging of protocol events be enabled only
during troubleshooting sessions. If protocol event
logging is enabled during normal network operation,
the switch may display messages that users may
incorrectly interpret as indications of protocol
failures.
troubleshoot network problems. Avaya recommends
that logging of protocol events be enabled only
during troubleshooting sessions. If protocol event
logging is enabled during normal network operation,
the switch may display messages that users may
incorrectly interpret as indications of protocol
failures.
If you enable event notification for CLI, SNMP, RIP, OSPF, DVMRP,
LDAP, Apple Talk, or VRRP, you must set which categories of the protocol
events generate notifications.
LDAP, Apple Talk, or VRRP, you must set which categories of the protocol
events generate notifications.
* Note: Enabling logging of protocol events may cause the event log to
rapidly fill with protocol events.
You can use either the Web Agent or the CLI to configure event notification
for protocol events.
for protocol events.
Web Agent
Procedure
Procedure
To set which categories of protocol events generate notifications:
1. In the navigation pane, expand the Events folder and then click Protocol
Events.
The Protocol Event Management Web page is displayed in the content
pane. See
pane. See
.