Avaya 580 사용자 설명서

Appendix A

A-10

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

To reset the switch after downloading new application software, use the 
following CLI command: 

(configure)# 

To verify that the old Active supervisor is now the Standby supervisor, the 
LED display window (marquee) should scroll 

Standby

 and the software 

version.

If the switch has multiple VLANs statically bound to hunt group ports and 
you want to upgrade from application software earlier than v5.3, you must: 

1.  Download the application software to which you want to upgrade. 

2.  Reset the switch to load this software.

3.  Delete all hunt groups to which you want to statically bind multiple 

VLANs. 

4.  Use the set vlan {<vlan-id> | name <vlan-name>} <mod-swport-

range> [...,<mod-swport-range>] CLI command to statically bind the 
VLANs to every port that you want to assign to a hunt group. 

5.  Assign the ports to hunt groups. 

6.  Save the running configuration to the startup configuration.