Avaya C360 사용자 설명서

 242

Avaya C360 Manager User Guide

The interface state of the OSPF interface:

• 

 - OSPF is not active on the interface.

• 

 - The identity of the designated 

router for this subnet is not yet determined.

• 

 

 - This router is the 

Designated Router on this subnet.

• 

 - This router is the 

Backup Designated Router.

• 

 - Another router is 

the Designated Router on this subnet.

If checked, this denotes that the interface may 
form neighbor relationships, and that the interface 
is advertised as an internal route to OSPF. If not 
checked, the interface is external to OSPF.

The IP Address of the designated router.

The IP Address of the backup designated router.

The priority of this router to become the 
designated router on this interface. A value of zero 
indicates that this router is not eligible to become 
the designated router on the current network. If 
more than one router has the same priority, then 
the router ID is used.

The cost of using this interface. OSPF will choose 
the route with the lowest total cost (metric) to 
each destination.

The period of time (in seconds) between Hello 
packets. All routers attached to a common 
network must have the same Hello Interval.

The period of time (in seconds) that a router’s 
Hello packets have not been seen before the 
router’s neighbors declare the router down. All 
routers attached to a common network must have 
the same Dead interval.

Authentication Type. Possible methods are: