Avaya ELAT 사용자 설명서

ExpertNet Lite Assessment Tool - User Guide

TProtocolSelect a traceroute protocol to be used to discover intermediate routers on 

Select an endpoint to which the RTP test is to be created. If Traffic 

Simulators are connected and registered with the Controller, they will 

be available in the drop-down menu for use in making new RTP tests

Defines the Codec of the RTP test calls. This will alter the rate and size 

of packets being sent between Traffic Simulators in order to emulate 

the G.711 and G.729 codecs.

Defines the Differentiated Services Code Point (DSCP) of the IP Packets 

of RTP test calls. Routers will treat packets differently depending on the 

DSCP value set in outgoing packets. By default this value is 46 

(Expedited Forwarding).

Defines the Voice Payload size of the RTP packets of a test call (in 

milliseconds). Must be a multiple of 10.

Number of equivalent VoIP calls for a selected codec in a single test. 

The default value for this setting is 2. Measurements for each call can 

only be taken in one direction. When two or more calls are configured, 

half of them originate at the Controller and half at the test agent so 

data is collected in both directions providing a more complete 

assessment of the network than if a single call were run.

Defines the duration of each RTP test call (in seconds).

Check this button if you want the Controller to discover intermediate 

routers on the path to the endpoint.

Select a traceroute protocol to be used to discover intermediate routers 

on the path to the selected endpoint.

Check this button if you want the Controller to collect SNMP statistics 

for devices on this path.