Avaya ELAT 사용자 설명서

ExpertNet Lite Assessment Tool - User Guide

When ELAT completes the data collection, it will upload the dataset automatically to 
the FTP server as configured in the Configuration Wizard. 

This column is useful for determining DSCP problems on the 

network. The DSCP is shown in a slash notation. The first value is 

the user-requested DSCP that will be injected into the network 

with the Ping/RTP packets. The second values show all the DSCP 

values that were found in the network in a comma separated 

format. For example: 
46|46,20/30,0 - means 46 was the priority code of packets sent 

into the network. On the forward link, packets were received with 

the setting 46 and 20, and on the backward link, it found packets 

with the setting 30 and 0. This indicates that the network isn't 

preserving the DSCP value.

Indicates the number of calls that will be run simultaneously on 

that link. Can run up to 10 calls on a single network link at the 

same time.

Each column indicates the QoS metric for that column. These will 

only be populated for RTP tests when a result is obtained, which 

is at the end of the call length that is configured for that test.
These columns will be blank for ping tests.
The Traffic Simulator will occasionally fail computing a test and 

this is represented in the controller as 100% loss and the status 

Failure. This does not mean your network actually has 100% loss 

on that link and this can be easily confirmed with a ping test. 

These results are thrown away for the purposes of graphing so it 

will not affect the reports.