Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
123
Example:
set ppp baud-rate
User level: read-write, admin.
Use the set ppp baud-rate command to define the baud rate used in PPP
sessions.
L You mujst set the peer baud rate to the same value as the host.
Use the set ppp baud-rate command to define the baud rate used in PPP
sessions.
L You mujst set the peer baud rate to the same value as the host.
The syntax for this command is:
set ppp baud-rate
<9600|19200|38400>
Example:
set ppp chap-secret
User level: admin.
Use the set ppp chap-secret command to configure the “shared secret” used
in PPP sessions with CHAP authentication. The chap-secret is not transferable via
the configuration upload/download mechanism.
Use the set ppp chap-secret command to configure the “shared secret” used
in PPP sessions with CHAP authentication. The chap-secret is not transferable via
the configuration upload/download mechanism.
The syntax for this command is:
set ppp chap-secret
<chap-secret>
Example:
set ppp incoming timeout
User level: read-write, admin.
Use the set ppp incoming timeout command to set the number of minutes
until the system automatically disconnects an idle PPP incoming session.
Use the set ppp incoming timeout command to set the number of minutes
until the system automatically disconnects an idle PPP incoming session.
C460-1# set ppp authentication incoming chap
PPP requires CHAP authentication for incoming sessions.
C460-1# set ppp baud-rate 38400
ppp baud rate was set to 38400
chap-secret
The shared secret, 4 to 32 characters.
C460-1(super)# set ppp chap secret hush
PPP shared secret for CHAP authentication is set