Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
150
Avaya C460 Reference Guide
show device-mode
User level: read-only, read-write, admin.
Use this command to display the switch operational mode (Layer 2 or Layer 3).
The syntax for this command is:
Use this command to display the switch operational mode (Layer 2 or Layer 3).
The syntax for this command is:
show device-mode
Example:
show dot1x
User level: user, privileged, supervisor
Use the show dot1x command to display the system dot1x capabilities, protocol
version, and timer values.
Use the show dot1x command to display the system dot1x capabilities, protocol
version, and timer values.
The syntax for this command is:
show dot1x
Example:
show dot1x statistics
User level: read-only, read-write, admin.
Use the show dot1x statistics command to display Rx and Tx EAPOL and
EAP statistics.
Use the show dot1x statistics command to display Rx and Tx EAPOL and
EAP statistics.
The syntax for this command is:
show dot1x statistics
C460-1> show device-mode
Device mode is Router
C460-1> show dot1x mode
PAE Capabilities Authenticator Only
Protocol Version 1
system-auth-control disabled
*** Warning : Authentication server ( RADIUS ) is disabled/not-exist and so
*** no authentication can be made