Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
155
The syntax for this command is:
show intelligent-multicast
Example:
show interface
User level: read-only, read-write, admin.
Use the show interface command to display information on network interfaces.
Use the show interface command to display information on network interfaces.
The syntax for this command is:
show interface
Example:
show ip access-group
User level: privileged, supervisor.
Use the show ip access-group command to display the active policy-list
number.
Use the show ip access-group command to display the active policy-list
number.
The syntax for this command is:
show ip access-group
Example:
C460-1> show intelligent-multicast
Intelligent-multicast configuration:
------------------------------------
intelligent-multicast state ---------------------- Disabled
Intelligent-multicast client-port-pruning time --- 600[Sec]
Intelligent-multicast router-port-pruning time --- 1800[Sec]
intelligent-multicast group-filtering-delay time - 10[Sec]
C460-1> show interface
Interface Name Status VLAN IP address Netmask
---------------- -------------- ---- --------------- ---------------
inband disabled 1 135.64.200.105 255.255.255.0
ppp disabled N/A 0.0.0.0 0.0.0.0
outband enabled N/A 135.64.200.105 255.255.255.255
C460-1# show ip access group
access-group 101