Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
14
Avaya C460 Reference Guide
arp
User level: read-write, admin.
L If you are at the “read-write” user level, you can only access this command in
L If you are at the “read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Type configure at the command prompt to enter configure mode.
Use the arp command to add a permanent entry to the Address Resolution Protocol
(ARP) cache.
Use the no arp command to remove an entry, either static entry or dynamically
learned.
(ARP) cache.
Use the no arp command to remove an entry, either static entry or dynamically
learned.
The syntax for this command is:
[no] arp
<ip-address> <mac-address>
Example:
To add a permanent entry for station 192.168.7.8 to the ARP cache:
To add a permanent entry for station 192.168.7.8 to the ARP cache:
Example:
To remove an entry to the ARP cache for the station 192.168.13.76:
To remove an entry to the ARP cache for the station 192.168.13.76:
arp timeout
User level: read-write, admin.
L If you are at the “read-write” user level, you can only access this command in
L If you are at the “read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Type configure at the command prompt to enter configure mode.
Use the arp timeout command to set the amount of time that an entry remains in
the ARP cache.
Use the no arp timeout command to restore the default value, 14,400.
the ARP cache.
Use the no arp timeout command to restore the default value, 14,400.
ip-address
IP address, in dotted decimal format, of the station
mac-address
MAC address of the local data link
C460-1(configure)# arp 192.168.7.8 00:40:0d:8c:2a:01
C460-1(configure)# no arp 192.168.13.76