Avaya C460 사용자 설명서

Chapter 2        Avaya C460 CLI Commands

28

Avaya C460 Reference Guide

The syntax for this command is:

<filename> <ip>

Example:

User level: read-write, admin.
Use the copy tftp startup-config command to copy the C460 configuration 
from the saved TFTP file to the Startup Configuration NVRAM.

The syntax for this command is:

 <filename> <ip>

Example:

User level: read-write, admin.
Use the copy tftp SW_imageA command to update the software image in Bank 
A of all the Supervisor Modules installed in the switch. 
L To use this command, you need to have an active tftp server and to create a file 

into which to download the data. 

L If Avaya MultiService Network Manager is running, you do not require an 

filename

file name (including full path)

ip

IP address of the host

C460-1# copy tftp l2-config c:\C460\backup 149.49.152.36

Beginning download operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.
*********************************************************************

* If you are currently running the C460 Device Manager application, *

* it is recommended to exit from it before performing configuration *
* download operations.                                              *

*********************************************************************

filename

file name (full path)

ip

The ip address of the host

Router-1> copy tftp startup-config c:\C460\router1.cfg