Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
37
ip access-default-action
User level: read-write, admin.
L If you are at the ”read-write” user level, you can only access this command in
L If you are at the ”read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
Type configure at the command prompt to enter configure mode if necessary.
Use the ip access-default-action command to set the default action for a
specific policy list.
specific policy list.
The syntax for this command is:
ip access-default-action
<policy-list-number> <default-
action>
Example:
ip access-group
User level: read-write, admin.
L If you are at the ”read-write” user level, you can only access this command in
L If you are at the ”read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
Type configure at the command prompt to enter configure mode if necessary.
Use the ip access-group command to activate a specific policy list.
Use the no ip access-group command to deactivate the policy list.
Use the no ip access-group command to deactivate the policy list.
The syntax for this command is:
[no] ip access-group
<policy-list-number>[<default-action>]
Example:
<policy-list-number>
integer (100 to 149)
<default-action>
default-action-deny|default-action-permit
C460-1(configure)# access-default-action 101 default-
action-deny
action-deny
<priority-list-number>
integer (100 to 149)
0 is the default list
0 is the default list
<default-action>
default-action-deny|default-action-permit
C460-1(configure)# ip access-group 101