Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
51
Example:
To display netmasks in decimal format:
To display netmasks in decimal format:
ip ospf authentication-key
User level: read-write, admin.
L You can only access this command in Interface mode.
L You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if
necessary.
necessary.
Use the ip ospf authentication-key command to configure the interface
authentication password.
Use the no ip ospf authentication-key command to remove the OSPF
password.
authentication password.
Use the no ip ospf authentication-key command to remove the OSPF
password.
The syntax for this command is:
[no] ip ospf authentication-key
<key>
Example:
ip ospf cost
User level: read-write, admin.
L You can only access this command in Interface mode.
L You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if
necessary.
necessary.
Use the ip ospf command to configure interface metric.
Use the no ip ospf cost command to set the cost to its default. The default is 1.
Use the no ip ospf cost command to set the cost to its default. The default is 1.
The syntax for this command is:
[no] ip ospf cost
<cost>
C460-1(configure)# ip netmask-format bitcount decimal
Done!
key
string (up to 8 characters)
Router-1(configure-if:marketing) # ip ospf authentication-
key my_pass
cost
integer