Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
133
The syntax for this command is:
set spantree max-age <seconds>
Example:
set spantree priority
User level: read-write, admin.
Use the set spantree priority command to set the bridge priority for STP.
Use the set spantree priority command to set the bridge priority for STP.
The syntax for this command is:
set spantree priority
<bridge_priority>
Example:
set spantree tx-hold-count
User level: read-write, admin.
Use the set spantree tx-hold-count command to limit the maximum
number of BPDUs transmitted during a hello-time period.
Use the set spantree tx-hold-count command to limit the maximum
number of BPDUs transmitted during a hello-time period.
The syntax for this command is:
set spantree tx-hold-count <rate>
max-age
The max age time in seconds to keep message information before it is
discarded. Value ranges between 6 to 40; value must be between 2 X
(Bridge-Hello-Time + 1) and 2 X (Bridge-Forward-Delay - 1).
Recommended value is 20 sec.
discarded. Value ranges between 6 to 40; value must be between 2 X
(Bridge-Hello-Time + 1) and 2 X (Bridge-Forward-Delay - 1).
Recommended value is 20 sec.
C460-1# set spantree max-age 20
bridge max age is set to 20.
bridge_priority
Number representing the priority of the bridge with a priority
level from 0 to 65535.
0 indicates high priority and 65535 indicates low priority.
level from 0 to 65535.
0 indicates high priority and 65535 indicates low priority.
C460-1# set spantree priority 4096
Bridge priority set to 4096.
rate
Value between 1 to 10; recommended value is 3