Avaya C460 사용자 설명서
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
45
The syntax for this command is:
[no] ip bootp-dhcp network
<ip-address>
Example:
To select the network 192.168.169.0 as the network from which an address shall be
allocated for bootp/dhcp requests:
To select the network 192.168.169.0 as the network from which an address shall be
allocated for bootp/dhcp requests:
ip bootp-dhcp relay
User level: read-write, admin.
L If you are at the “read-write” user level, you can only access this command in
L If you are at the “read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Type configure at the command prompt to enter configure mode.
Use the ip bootp-dhcp command to enable relaying of bootp and dhcp requests
to the bootp/dhcp server.
Use the no ip bootp-dhcp command to disable bootp/dhcp relay.
The default state is disabled.
to the bootp/dhcp server.
Use the no ip bootp-dhcp command to disable bootp/dhcp relay.
The default state is disabled.
The syntax for this command is:
[no] ip bootp-dhcp relay
Example:
To enable relaying of BOOTP and DHCP requests:
To enable relaying of BOOTP and DHCP requests:
To disable relaying of bootp and dhcp requests:
ip-address
The IP address of the network.
Router-1(configure-if:marketing) # ip bootp-dhcp network
192.168.169.0
Done!
C460-1(configure)# ip bootp-dhcp relay
Done!
C460-1(configure)# no ip bootp-dhcp relay
Done!