Benq Joybee 150-256MB/Silver 98.K1005.E04 사용자 설명서

제품 코드
98.K1005.E04
다운로드
페이지 48
Notes, FAQ and Troubleshooting Tips
43
FAQ and Troubleshooting Tips
Why can’t I play certain songs in WMA format using my Joybee 150 Digital Audio Player?
Some WMA songs currently available from the Internet are copyright protected. This kind 
of protection method prevents unauthorized person from playing protected song files. 
These songs can only be played using a Window Media Player program that has been autho-
rized. If you are already authorized to play these protected songs and want to make them 
playable on your Joybee 150 Digital Audio Player, follow the steps below:
1. Open Windows Media Player and select O
Open in the F
File menu.
2. Select the songs you want to transfer to the Joybee 150 Digital Audio Player and click 
Open.
3. Connect the Joybee 150 Digital Audio Player to your computer. A new Removable Disk 
should appear in the M
My Computer window.
4. Select C
Copy in the Windows Media Player F
File menu, and then select C
Copy to portable 
devices.
5. A file list will appear. Check to select the songs you want to copy to the Joybee 150 Digital 
Audio Player and then click the C
Copy button located at the upper right corner of the 
screen.
The music files will be copied and become playable using the Joybee 150 Digital Audio 
Player.
How many minutes of MP3 music can be stored in the Joybee 150 Digital Audio Player? 
It depends on the memory capacity of the player and the compression ratio used in 
encoding the MP3 files. For MP3 files encoded by MPEG1 Layer3 with a bitrate of 128kbps 
and sampling frequency of 44kHz (most commonly used), 1MB of memory can store about 
1 minute of music. i.e. 128MB/256MB of memory stores about 128/256 minutes of music. 
How long is the maximum recording time? 
Recording time depends on the encoding method, bitrate, sampling frequency and memory 
capacity of the player. If high sound quality is not needed for recording of meeting or 
lecture, lower bitrate and sampling frequency such as MPEG1 Layer3, bitrate: 16kbps, 
sampling frequency: 16kHz are recommended. To record with high sound quality, use 
higher bitrate and sampling frequency such as MPEG1 Layer3, bitrate: 224kbps, sampling 
frequency: 48kHz. The following table shows the recording time for different settings of 
recording. Please see "Record Setup" on page 14 for how to configure them.
When should I recharge the battery? 
When the battery indicator on the display shows that the battery is empty, or battery appears 
to be weak (there is only one bar in the battery icon) or when the sound quality deteriorates, 
recharge the battery as soon as possible.  
Encoding 
method
Bitrate
Sampling 
Frequency
Qccupied 
memory space
Recording time 
per MB
MPEG2 Layer3
16kbps
16kHz
120kByte
9 minutes
MPEG2 Layer3 128kbps
44.1kHz
960kByte
1 minute
MPEG2 Layer3 224kbps
48kHz
1640kByte
40 seonds
MPEG2 Layer3 32kbps
32kHz
500kByte
2 minutes
MPEG2 Layer3
96kbps
22.05kHz
720kByte
1.4 minutes