Avaya P332MF 사용자 설명서

Chapter 6

CLI – Layer 2

Avaya P332MF User’s Guide

109

Use the

 set port mirror 

command to define a port mirroring source-

destination pair in the stack.

The syntax for this command is:

set port mirror source-port <mod_num>/<port_num> mirror-port 

<mod_num>/<port_num> sampling {always|disable} direction 

{rx|tx|both}

Output Example:

P330-N# set port mirror source-port 1/9 mirror-port 1/10 

sampling always direction both

Mirroring both Rx and Tx packets from port 1/9 to port 1/10 is 

enabled

Use the 

set port spantree

 command to enable or disable the spanning tree 

mode for specific switch ports.

The syntax for this command is:

set port spantree {enable|disable} [module/port]

Output Example:
Enable the spanning tree mode for port 2 on module 3. 

P330-N# set port spantree enable 3/2

always

Keyword to activate the port mirroring entry

disable

Keyword to change the status of the port mirroring entry to “not active”

rx

Keyword to copy only incoming traffic

tx

Keyword to copy only outgoing traffic

both

Keyword to copy both incoming and outgoing traffic

enable|disable

Enables or disables the spanning tree mode for the 
specified ports. 

module/port

The switch/port number.