Avaya P332MF 사용자 설명서

Chapter 6

CLI – Layer 2

Avaya P332MF User’s Guide

71

Use the 

show rmon history

 command to show the most recent RMON history 

log for a given History Index. The history index is defined using the

 rmon 

history 

command on Page 126 or using an RMON management tool.

The syntax for this command is:

show rmon history [<History Index>]

P330-N> show rmon history 1026

history

Entry 1026 is active, owned by amir

Monitors ifEntry.1.1026 every 30 seconds

Requested # of time intervals, ie buckets, is 20

Granted # of time intervals, ie buckets, is 20

Sample # 1 began measuring at 2:53:9

Received 62545 octets, 642 packets,

391 broadcast and 145 multicast packets,

0 undersize and 0 oversize packets,

0 fragments and 0 jabbers,

0 CRC alignment errors and 0 collisions,

# of dropped packet events (due to a lack of resources): 0

Network utilization is estimated at 0

Use the 

show rmon alarm

 command to show the parameters set for a specific 

alarm entry that was set using the rmon alarm command on Page 127 or using the 
P330 Device Manager.

The syntax for this command is:

show rmon alarm [<Alarm Index>]

Output Example:

P330-N> show rmon alarm 1026

alarm

alarm 1026 is active, owned by amir

Monitors ifEntry.1.1026 every 60 seconds

Taking delta samples, last value was 1712

Rising threshold is 10000, assigned to event # 1054

Falling threshold is 10, assigned to event # 1054

On startup enable rising or_falling alarms