Avaya M770 사용자 설명서

Chapter 8

Permanent Virtual Connections (PVCs and PVPs)

106

Avaya M770 ATM Switch User’s Guide

Disabling a PVC connection

To temporarily disable an established PVC connection, use the 

pvc disable

command. 

Oper

The operational state of the PVC connection.
• If the state is “UP” then this PVC is functional. 
• If the state is “DOWN” then this PVC is not functional. This may 

be because either the PVC is disabled or a port (on this switch) 
used by the PVC is down.

Type

Indicates whether this is a Point-to-Point PVC (PP) or a Point-to-
Multipoint (P2MP) PVC.

TrunkId

The trunk id that is used by the PMP call. New branches to existing 
calls can be added using the existing trunk ID. The format is 
<slot>.<index> where <slot> is the slot number of the module that 
holds the root of the call.

Command:

M15-155s8:/>pvc disable <vclindex>

Example:

M15-155s8:/>pvc disable 9.2.0.805

Parameter:

<vclindex>

Index is one of the VCLs of the PVC connection
Note:  If PP PVC - the PVC is disabled.

If P2MP PVC - 

If the VCL is Root VCL, the entire PMP tree and
associated VCLs are disabled.
If the VCL Branch VCL, the designated PVC and
it's associated VCLs are disabled.

Field

Description