Avaya M770 사용자 설명서

다운로드
페이지 338
Chapter 10
Managing PNNI Routing
Avaya M770 ATM Switch User’s Guide
125
by the switch using a private protocol or manually configured, and advertised using 
Exterior RA IGs. Finally, the total number of different PTSEs received at this node is 
displayed.
Topology hierarchy list
Use the following command to display the hierarchy list of the PNNI network:
The hierarchy list represents the hierarchy of peer groups as it is seen from this 
switch (physical node).
As described in the ATM Forum PNNI protocol, each node sees its peer group, and 
the peer groups that are directly above it. It doesn't see neighboring peer groups, 
their content or their internal information.
The output example above represents a network with 2 levels of hierarchy. Level 1 
represents the lowest level, where the physical node resides. The Level 1 output 
displays the following:
Level scope (56)
nodeID
ATM Address
Peer group ID for the physical node
The nodeID of the Peer Group Leader (PGL) of this peer group (if it exists)
The next level in the hierarchy, the Level 2 output, displays the following :
Level scope (48)
nodeID
ATM address
Command:
M15-155s8:/>route pnni topology hlist
Output:
Hlist:
Level=1. Scope=56
nodeId:  
38.A0.39.03.00.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.00.1
6.00
atmAddr: 
39.03.00.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.01.B8.81
pgId:    38.39.04.00.00.00.00.00.00.00.00.00.00.00
PGL:      
38.A0.39.03.00.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.00.1
6.00
Level=2. Scope=48
nodeId:  
30.38.39.03.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.01.B8.0
0.00
atmAddr: 
39.03.00.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.01.B8.82
pgId:    30.39.00.00.00.00.00.00.00.00.00.00.00.00
PGL:     -----
Done!