Avaya M770 사용자 설명서

Chapter 12

Managing SNMP

Avaya M770 ATM Switch User’s Guide

175

Using Permanent Managers Configuration Commands

This section describes how to view and set up a list of Permanent Managers. These 
are a list of the Network Management Stations which receive SNMP Traps.

To add a new manager to the list, use the

permngr add 

command.

To list all the current managers use the

permngr show

 

command.

To update an existing managers’ IP address, use the

permngr update

 

command.

To remove a new manager from the list, use the

permngr remove

 

command.

Command:

M15-155s8:/>snmp permngr add <ip_addr>

Parameters:

<ip_addr> - the ip address of the manager that need to 

be added to the permanent manager table.

Example:

M15-155s8:/>snmp permngr add 149.49.34.216

Command:

M15-155s8:/>snmp permngr show

Output:

Permanent Managers:

-----------------------------

1 - 149.49.36.251

2 - 149.49.39.216

Syntax:

M15-155s8:/>snmp permngr update <index> <ip_addr>

Parameters:

<index> - The permanent manager table index of the 

manager ip address that needs to be updated.

<ip_addr> - the updated manager ip address.

Example:

M15-155s8:/>snmp permngr update 1 149.49.34.217

M15-155s8:/>snmp permngr show

Permanent Managers:

-----------------------------

 1  - 149.49.36.217

 2  - 149.49.39.216

Command:

M15-155s8:/>snmp permngr remove <index>

Parameters:

The permanent manager table index of the ip address 

that needs to be removed

Example:

M15-155s8:/>snmp permngr remove 2