Avaya M770 사용자 설명서
Appendix B
Using BOOT Loader
284
Avaya M770 ATM Switch User’s Guide
Controlled shutdown of the switch
This command is used for a controlled shutdown of a module, any connections that
still remain on that module will be lost. A warning to this effect is displayed and
confirmation is requested before the module is powered down.
To carry out a controlled shutdown of the switch in preparation for a power down,
use the
still remain on that module will be lost. A warning to this effect is displayed and
confirmation is requested before the module is powered down.
To carry out a controlled shutdown of the switch in preparation for a power down,
use the
system halt
command.
Note:
This command should be carried out before the M770 ATM Switch has its
power disconnected.
Command:
M15-155s8:/>system halt
Output:
This will stop the module, losing all
connections - do you want to continue (y/n)?