Avaya M770 사용자 설명서

Chapter 3

How to Use the Command-line Interface

Avaya M770 ATM Switch User’s Guide

23

If you press the RETURN key immediately after the prompt, it has the same 

effect as entering the

up

 command.

If you are at a particular point in the hierarchy and you need to perform a command 
elsewhere in the hierarchy, you must enter the slash symbol (/) followed by the full 
hierarchical path followed by the command. For example:

This command will list information about virtual ports while you are in the 

route

 

functional group. After the command has been executed you will still be in the 

route

 

functional group.

After resetting a module, some of the CLI commands may not be available 

immediately. Wait a few seconds until all the software has initialized.

The Master Agent and Sub Agent have slightly different CLI options. For example, 
the Master Agent has the “ip” command and the “access” command which will 
enable you to access a Sub Agent from the Master Agent. A simple way to find out 
whether you are currently communicating with a Master Agent is to type “help” at 
the command line and check whether there is an “access” command option.
All the information configured to the Master Agent (IP, Permanent Managers) is 
backed up by the Sub Agent, so if the Master Agent is removed, another module 
will be elected and all previous configuration settings will be kept.

The hierarchy of the commands in the Command Line Interface (CLI) can be 
obtained at any time by typing

 tree

.

The

 tree 

command can be used at the 

prompt of any functional group to view the sub-commands of the group.

M15-155s8:/route>/vport show