Avaya M770 사용자 설명서

Chapter 4

Managing Miscellaneous Commands

32

Avaya M770 ATM Switch User’s Guide

You can display IP address information for the M770 ATM Switch. For information 
about changing the IP address information, see “Setting the Avaya M770 ATM 
Switch IP address, subnet mask, and gateway” on page 31.
To view the IP address information, use the 

ip show

 

command. The message 

“initializing” indicates that the LEC has not yet joined the ELAN.

The End System Identifier (ESI), also referred to as the Burnt-In Address (BIA), is 
the factory-assigned world-wide unique address for the switch. If the management 
LEC on the M770 ATM Switch is joined to an Ethernet ELAN, its MAC address will 
default to the ESI (Ethernet format).
To display the BIA (ESI) of the M770 ATM Switch, use the

address esi

 

command.

The ESI cannot be changed. However, in the case of LANE, a Locally 

Administered Address (LAA) can be defined. For more information see “Managing 
the ELAN for the management LEC” on page 165.

Command:

M15-155s8:/>ip show

Output:

IP address: 192.32.220.61 (The address was obtained 

using BOOTP.)

IP subnet mask: 255.255.255.0

IP gateway address: 192.32.220.8

MAC address: <valid address> (or initializing)

Layer 2: ok (or initializing)

Command:

M15-155s8:/>address esi

Output:

Switch ESI Address (Ethernet Format):

 

00.40.0D.07.00.0e