Avaya M770 사용자 설명서
Chapter 4
Managing Miscellaneous Commands
Avaya M770 ATM Switch User’s Guide
35
Using PING
The M770 ATM Switch allows you to PING an IP address. The M770 ATM Switch
will send one Internet Control Message Protocol (ICMP) echo request to the address
each second until you press CTRL-C. Whenever the remote device responds, the
time taken to respond is displayed in milliseconds.
To PING an IP address, use the
will send one Internet Control Message Protocol (ICMP) echo request to the address
each second until you press CTRL-C. Whenever the remote device responds, the
time taken to respond is displayed in milliseconds.
To PING an IP address, use the
ip ping
command.
Note:
The command will continue to PING. To interrupt it, press CTRL-C.
Command:
M15-155s8:/>ip ping <address>
Example:
M15-155s8:/>ip ping 192.32.220.5
Parameters:
<address>
The IP address for the remote device.
Output:
PING: target address is 192.32.220.5
Type Control+C to stop the ping sequence
Response from 192.32.220.5: seq 0, delay 5 ms
Response from 192.32.220.5: seq 1, delay 2 ms
Response from 192.32.220.5: seq 2, delay 2 ms
Response from 192.32.220.5: seq 3, delay 1 ms
Response from 192.32.220.5: seq 4, delay 1 ms
Ping of 192.32.220.5
Packets sent: 5
Packets received: 5