Avaya P130 사용자 설명서

Chapter 6        Avaya P130 CLI

88

 Avaya P130 User’s Guide

Use the 

set trunk command to configure the tagging mode.

The syntax for this command is:
set trunk <mod_num>/<port_num> {off|dot1q}

Example:
P130-1# set trunk 1/19 dot1q
Dot1Q VLAN tagging set on port 1/19.

P130-1# set trunk 1/19 off
No VLAN tagging set on port 1/19.

Use the 

clear vlan command to delete an existing VLAN and return ports from 

this VLAN to the default VLAN #1. When you clear a VLAN, all ports assigned to 
that VLAN are assigned to the default VLAN #1.

The syntax for this command is:
clear vlan [VLAN_num]

Example:

This example shows how you can delete an existing VLAN (VLAN 4) from a 
management domain:
P130-1# clear vlan 4
This command will assign all ports on VLAN 4 to their default 
in the entire management domain

<mod_num>

Module number 

<port_num>

Number of the port on the module 

off

Forces the port to become a non-tagging port. The port is in the 
clear (tagging) mode: it will never send frames as tagged, but it 
will correctly interpret received tagged frames. 

dot1q

Forces the port to become a 802.1Q tagging port. The port is in 
the tagging mode: it will send frames as tagged and will 
correctly interpret received untagged frames. 

VLAN_num

Number of the VLAN (range is 1 to 4079).